Keep comments on the videos above.
Amazon USA: https://amzn.to/4h6NQkS , Amazon India: https://amzn.to/4h6rFLi
Note: If you use any of the links for purchasing check respective Instagram Broadcast to see if your purchase helped this channel or not. If it doesn't, you can donate like everyone else.
All Files goes here which included the Logitech Profiler File which seems necessary but I still haven't found a way to use it.
The game detects the flight stick but gives no way to actually bind the controls to the controller. Earlier I manually bound with X360 application but it isn't perfect and requires a lot of setup, thankfully someone had already made a guide on steam for it. I am just improving a few steps for it as some people were still confused after the guide too.
Step 0: Play the game at least once and also plug in the USB Joystick at least once. Then close the Ace Combat 7 game.
Step 1: Win+R→ appdata ↵
Step 2: Navigate to Appdata→Local→BANDAI NAMCO Entertainment→ACE COMBAT 7→Configs
Step 3: Input.ini Open file with Notepad++ or Notepad.
Step 4: Find the New Flight Stick device section in the notepad, it will have a long serial number like this:
Note: If you don't see a Flight Stick Device, install the Logitech Profiler from above.
Step 5: Below this change all the mappings to ones below:
Flight_Gun=Button2
Flight_Missile=Button1
Flight_Weapon=Button6
Flight_Target=Button4
Flight_Radar=Button5
Flight_Flare=Button3
Flight_View=Button12
Flight_AccelerationDeceleration=
Flight_AutoPilot=Button11
Flight_Pause=Button7
Flight_HatSwitchUp=POV_U1
Flight_HatSwitchDown=POV_D1
Flight_HatSwitchLeft=POV_L1
Flight_HatSwitchRight=POV_R1
Flight_Pitch=Y:R
Flight_Roll=X
Flight_Yaw=Rz
Flight_Throttle=Slider1
Flight_CameraPitch=POV_U1:R
Flight_CameraPitch=POV_D1
Flight_CameraYaw=POV_L1:R
Flight_CameraYaw=POV_R1
UI_B=Button1
UI_A=Button2
UI_X=Button3
UI_Y=Button4
UI_LB=
UI_RB=
UI_LT=
UI_RT=
UI_LeftStickPress=
UI_RightStickPress=
UI_DPadUp=
UI_DPadDown=
UI_DPadLeft=
UI_DPadRight=
UI_LeftStickUp=POV_U1
UI_LeftStickDown=POV_D1
UI_LeftStickLeft=POV_L1
UI_LeftStickRight=POV_R1
UI_RightStickUp=
UI_RightStickDown=
UI_RightStickLeft=
UI_RightStickRight=
UI_Menu=Button9
Save and exit.
Now you will see you are able to use your joystick normally. This is the preferred method over the X360 one which I showed in the video above as this isn't mapping the controlls to something else for it.